2015 - 2020 Suzuki GSX-S750 No Cut Frame Front & Rear Axle Sliders Case Covers Spools

2015 - 2020 Suzuki GSX-S750 No Cut Frame Front & Rear Axle Sliders Case Covers Spools

Regular price$244.95
/

2015 - 2020 Suzuki GSX-S750 No Cut Frame Front & Rear Axle Sliders Case Covers Spools

Part number: N238-16COMBO

  • Condition: New
  • Special feature: Brackets are designed NOT to rotate in a low side
  • Material: UHMW-PE (ultra high molecular weight polyethylene), black anodized aircraft grade aluminum brackets
  • NO CUT or plastic fairings modification required
  • Fit Models: Suzuki
  • 2015 - 2023 GSX-S750
  • Fitting Difficulty (1-5): 2 - Average (1 - easy / 5 - Little bit of skill)
  • Fitting Time: 45 - 60 minutes
  • PDF Instruction: Frame Sliders / Case Covers
This purchase is for a set of frame sliders, case covers, spool adapters, and front & rear axle sliders for the above bike model. The sliders feature a new design of a complete solid puck without a hollowed-out center. This increases the strength and contact surface to about 30%. The bracket is bolted to the engine mount and the slider puck is bolted onto it. The brackets have two attachment points preventing them from rotating in the event of a low side. The material of the puck is made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for frame sliders since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low-side. For this model, normal spools will damage the stock exhaust because the spool mounts located too much forward and too close to the exhausts. These spool adapters are designed to prevent damage to the exhausts and the swingarms. It moves the spools rearward about two inches. The spools are made of UHMW-PE. We use highest grade commercially available 12.9(177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.

Fitment is as listed by T-Rex Racing. Confirm fitment on the product description before purchasing.

Source: T-Rex Racing product page (retrieved 18 Nov 2026).

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.